Fluorescent Emergency Ballast Wiring Diagram

```html

Wiring an Emergency Fluorescent Light: A Comprehensive Guide

Step 1: Understanding the Wiring Diagrams

Locate the wiring diagrams printed on the back or inside of the emergency light fixture. These diagrams provide crucial instructions for wiring the light correctly. Pay close attention to the specific wiring requirements for your fixture type.

Referencing the Wiring Diagrams

To ensure proper wiring, you must refer to the wiring diagrams when connecting the following components:

• Lamps
• Ballast
• Emergency ballast (if applicable)

Step 2: Wiring the Main Fluorescent Lamp and Ballast

Locate the main lamp holder and ballast within the light fixture. Connect the lamp holder terminals to the corresponding ballast terminals using the appropriate wire connectors.

• Ensure that the wire connectors are securely fastened.
• Verify that the lamp holder and ballast are correctly positioned.
• Follow the wiring diagram's instructions for specific terminal connections.

Circuit Requirements

It is crucial that the ballast be installed on the same branch circuit as the main fluorescent lamp. This ensures that both the lamp and ballast receive power from the same electrical source.

Step 3: Wiring the Emergency Ballast (if applicable)

If your light fixture includes an emergency ballast for backup illumination, follow these steps:

• Identify the type of AC ballast installed in the fixture.
• Connect the emergency ballast to the main ballast.
• Refer to the wiring diagram for specific terminal connections.
• Securely fasten all wire connections.

Step 4: Installing the Fixture

Once all wiring is completed, carefully install the light fixture according to the manufacturer's instructions. Secure the fixture firmly and ensure that all electrical connections are tightly fastened.

Additional Tips

For optimal performance and safety, consider these additional tips:

• Use the correct type of wires and wire connectors.
• Double-check all wire connections before energizing the fixture.
• Ensure that the fixture is properly grounded.
• Seek professional assistance if you are unsure about any aspect of the wiring process.

```

Sanforce Tech

Hatch Lighting